Devices & networks
Temperature probes, meters, detectors, GPS trackers: your devices can come from different manufacturers and use different networks. As long as their model is supported, Telemesure translates their messages and everything comes into the same portal.
More than 20 manufacturerswhose sensors are supported
Dozens of modelstranslated automatically
LoRaWAN, Sigfox, 4G and the Internetplus satellite for remote sites
Set up with a codein the portal or the mobile app
What you can connect
Here are the main families of devices that Telemesure can already read. Support is model by model: we always check yours before recommending it.
Ambient sensors for your premises, or sensors with a remote probe to measure inside a cold room, a freezer or a display cabinet.
A door opening, a shock or a tip-over, water on the floor, or a machine’s on/off status.
CO₂, volatile organic compounds, fine particles, formaldehyde or ozone indoors, weather stations outdoors.
Electricity meters, current clamps and pulse counters, to read water, gas or electricity remotely.
The level of your tanks, measured by ultrasound, by laser or by an industrial probe (4-20 mA, the standard for factory sensors).
Trackers for vehicles, machinery and objects. Depending on the model and the network, a position can also be obtained via Wi-Fi or via the network, without GPS.
Call or alert buttons, smoke and carbon monoxide detectors. On buttons that allow it, you choose who to notify each time the button is pressed.
Mains power, backup batteries, ventilation and door openings. Connected locks, with dedicated hardware.
Presence in a room, people counting, occupancy of meeting rooms or parking spaces.
Soil moisture and irrigation controllers, for your crops, your greenhouses or your green spaces.
Any device or software that can send its data over the web can be connected, even if it is custom-built. We set up the connection with you.
And also: noise level, pump temperatures and vibrations, network coverage testers… Have a specific device in mind? We’ll look into connecting it.
The networks
A sensor sends its readings by radio, over the mobile network or over the Internet. The right choice depends on the location (indoors, outdoors, remote area), the amount of data to send and how the device is powered. We help you choose.
A long-range, very energy-efficient radio network designed for sensors. There are two ways to use it: an operator’s network, depending on coverage and the contracts available, or a private gateway (antenna) on your site.
Suited to: battery-powered sensors in buildings, warehouses or large sites.
A radio network for small messages, very energy-efficient. The sensor can also receive a short message in return and, depending on the network, be located approximately without GPS.
Suited to: sensors that send little data, such as an alarm, a level or a meter reading.
With a SIM card dedicated to connected devices. LTE-M is a version of 4G designed for them. Depending on the SIM card, the portal also shows data usage.
Suited to: GPS trackers, vehicles and devices that send more data.
Any device or software that can send its data over the web. For some manufacturers that have their own online service, Telemesure fetches the readings directly from that service.
Suited to: devices already connected to your IT network, and your custom developments.
A satellite link is possible for areas with no coverage at all.
Suited to: remote sites, far from any network.
A standard protocol for exchanging messages between connected devices and servers. Connection via MQTT is possible.
Suited to: industrial equipment and gateways that already use it.
Both ways. Depending on the network and the model, Telemesure can also send commands to your connected devices: change how often they send data, switch equipment on or off. The command goes out the next time the device makes contact. Not all devices can be controlled remotely.
Private LoRaWAN
A basement, a cold room deep inside a building, a remote site: if radio coverage is not enough, a private LoRaWAN gateway (antenna) can be installed on your site. It sends the readings straight to Telemesure.
Many brands, one portal
Each manufacturer encodes its devices’ messages in its own way. For every supported model, Telemesure automatically translates them into readable values: degrees, percentages, a door open or closed, a position.
Your devices
A LoRaWAN probe, a 4G tracker and a technical cabinet sit side by side, each with its status and its last transmission. You can see straight away which ones are sending their data properly.
More than 20
sensor manufacturers already supported, across dozens of models.
Indicative list, in alphabetical order. Support covers specific models, not a manufacturer’s whole range. The brands mentioned belong to their respective owners. Mentioning them does not imply any partnership.
Your device isn’t on the list?
Already have sensors, or a specific device in mind? Tell us about it. We check whether it is already supported, or what it takes to connect it.
The make, the model, the network it uses and, if you have it, the manufacturer’s documentation.
Whether it is already supported, or what it takes to connect it: translating its messages, the network, the set-up.
We tell you what to plan for. Once connected, the device joins your portal like all the others.
Your data, into your tools
The readings, already translated into readable values, don’t stay locked away in the portal. They can automatically feed your own tools, or be exported whenever you need them.
Each device can forward its readings, already translated, to your software’s web address: building management system (BMS), maintenance management software (CMMS), business management software (ERP)… with whatever authentication your software requires.
Only readings are sent, not alerts.
An API is an entry point that lets one piece of software talk to another. The administrator creates access keys for your IT teams. With them, they read the list of devices, their readings and their latest values, and queue commands to be sent to the devices.
Interactive documentation is built into the portal.
You choose a period and a device, or several devices in the same export. The CSV file, which opens in your spreadsheet software, is prepared, then a download link arrives by email.
Frequently asked questions
If their model is already supported, yes: they join your portal like all the others. If not, tell us about them: we look into connecting them with you and tell you what to plan for.
It depends on the location (indoors, outdoors, remote area), the amount of data to send and how the device is powered. For battery-powered sensors, LoRaWAN or Sigfox are often a good fit, and for vehicles, the mobile network. We discuss it with you when we look at your needs.
A private LoRaWAN gateway (antenna) can be installed on your site: you can check its connection status in your portal. For areas with no coverage at all, a satellite link is possible.
Every product supplied carries an activation code. You enter it in the portal or in the mobile app, and the device appears in your account.
For some devices, yes: Telemesure can change how often they send data, schedule how they run, or switch equipment on or off. The command goes out the next time the device makes contact. It depends on the network and the model: not all devices can be controlled remotely.
Automatic sending to your software covers readings. Alerts, on the other hand, notify the people you choose, by email, text message (SMS), voice call or push notification, depending on the alert’s severity and the time slots you have set.
Request a demo
Tell us which equipment and which sites are involved. We look at your needs and show you Telemesure on an example close to yours, with demo data.
Access your account or ask our team a question.
Support hours: Monday to Friday, 9:00 to 17:30 (Paris time), excluding public holidays.
